🌊 UNIVERSAL AQUASTOP INLET HOSE for LG Dishwashers — Flood-Safe Replacement 🌊

Keep your kitchen protected from leaks and overflows with this Universal AquaStop Inlet Hose designed to suit LG dishwashers that use AquaStop / water-safety hoses. Built for reliability and easy DIY replacement, this hose automatically shuts off water flow if a leak is detected — giving you peace of mind and helping prevent costly water damage. 🙌

✅ Direct Replacement For These LG Part Numbers

If your original hose matches any of the numbers below, this is the right upgrade/replacement:

• 5215ED1001A

• 5215ED1002F

• 5215DD1001

• 5215DD1001C

🧩 Tip: You’ll usually find the part number printed on the old hose’s tag or in your dishwasher’s parts diagram.

💡 What is an AquaStop Hose?

An AquaStop (a.k.a. flood-safe or water-safety) hose has a protective valve assembly that shuts off water automatically if it detects a burst, leak, or internal failure. It’s a smart safeguard between your tap and dishwasher. 🛡️

🔧 Why You’ll Love It

• Leak & Flood Protection — Built-in shutoff valve helps protect floors, cabinets, and appliances.

• Universal Fit for LG AquaStop Systems — Compatible with LG models using the part numbers listed above.

• DIY-Friendly — Standard dishwasher inlet connectors for quick installation.

• Durable Construction — Robust hose jacket and sealed valve housing for long service life.

• Perfect as a Preventative Upgrade — Replace aging hoses before they fail.

📦 What’s Included

• 1 × Universal AquaStop Inlet Hose (for LG dishwashers using the part numbers above)

• Pre-fitted end connectors

• Quick start installation guide

🛠️ Installation (Quick Guide)

1. Unplug the dishwasher and turn off the water at the tap.

2. Place a towel under the connection to catch drips.

3. Unscrew the old inlet hose at both ends (tap & dishwasher).

4. Attach the AquaStop valve end to the tap (hand-tighten, then snug with a wrench—don’t overtighten).

5. Connect the other end to the dishwasher inlet.

6. Turn water on, check for leaks, then run a short cycle to verify.

🧰 If you’re unsure, consult a licensed technician or your appliance manual.

🧪 Quality & Safety Notes

• Designed for cold water inlet on household dishwashers.

• For indoor, domestic use.

• Replace any hose that shows kinks, bulges, or damage.

• Always confirm your model compatibility by part number before ordering.

📝 Compatibility & Model Check

This hose is intended for LG dishwashers that originally shipped with an AquaStop hose matching: 5215ED1001A / 5215ED1002F / 5215DD1001 / 5215DD1001C.

• Look for your model tag on the door frame or side panel.

• Cross-check your parts list or contact us with your full model number + serial and we’ll help confirm. 👍

❓FAQ

Q: Will this fit my LG dishwasher if my part number is on the list?
A: Yes — it’s a direct replacement for the listed part numbers.

Q: Is Teflon tape required?
A: Not usually. Most dishwasher inlet fittings seal with rubber washers. If you do use tape, apply sparingly on the tap’s thread only.

Q: Can I use it with hot water?
A: Use with the water temperature specified in your dishwasher manual (most LG units use cold).

🔎 SEO Keywords (for better search visibility)

LG AquaStop hose, LG dishwasher inlet hose, 5215ED1001A hose, 5215ED1002F replacement, 5215DD1001 AquaStop, 5215DD1001C hose, LG flood safe hose, LG water safety inlet hose, LG dishwasher water inlet pipe, universal AquaStop hose for LG.

🛒 Why Buy From Us?

• 🚚 Fast shipping

• 🧩 Expert compatibility support

• 🛡️ Warranty-backed quality

• ❤️ Local seller support